FedEx

The FedEx integration is one of the most advanced integrations in UltraCart.  By configuring your FedEx API information, UltraCart will not only be able to estimate rates using the discounts that you have with FedEx, but also print domestic shipping labels directly to PDF. 

FEDEX Credentials

There are two sets of API credentials required for the FEDEX API integration:

1. "Sandbox " Test Credentials (Used to complete the Label Certification)
2. Production Credentials 

The 4 API credentials are:

1. Account Number
2. Meter Number
3. Web Service Authentication Key
4. Web Service Password

Obtaining Your Sandbox Test Credentials

Your test credentials are required to complete the Label printing certification step. 

To obtain your FEDEX Test API credentials:

1. Register for a FedEx developer account if you do not already have one.
2. Login to your FedEx online account. 
3. Visit FedEx Web Services Page --> FedEx Web Services --> Develop and Test --> Get your test key
4. Complete the form and make sure you select "Global and US" , then accept the agreement to continue. 
   (If you're testing intra-country within European countries, select the right country in addtion to a US and Global account number.)
5. Next:
   Image Removed
   
6. You'll be presented with Account Number, and Meter Number and Authentication Key
   Copy and save your credentials, you'll enter these into your UltraCart account in a little bit.
7. Finally, check your email that is associated to your FedEx account.
   You should receive an email titled:"Your Developer Test Key Registration is complete"
   Copy and save your Test Password.

Obtaining Your Productions API Credentials

1. Visit FedEx Web Services, then navigate:
   FedEx Web Services → Move to Production →  Get Production Key
2. Fill out the presented forms, then accept the agreement to continue.
   See example form selections below:
   Image Removed
   
3. You'll be presented with the Production Authentication Key and Meter Number. Copy and save the credentials.
4. Next, navigate to: 
   My Profile → Account Management
Copy and save your Production Account Number.

5. Finally, check your email that is associated to your FedEx account.
You should receive an email titled:"Your developer Production Key Registration is complete"
Copy and save your Production Password.

Now that we have our Test and Production API credentials, we can configure them within UltraCart.

Log into your UltraCart account, then navigate:

The FedEx configuration shown below. Fill in your Test and Production Credentials:

Image Removed

Now that you have your TEST and Production credentials saved, you'll need to complete the rest of the UltraCart FEDEX Configuration form.

• For Web Service Version choose "26" from the drop down list
• For Rating you'll choose between "List" (retail pricing) or "Discounted" (your negotiated rates)
• Enter your Sender Address details
• For SmartPost Hub, enter your Hub ID.
• SmartPost Rate < 1 LB (Checkbox field) select if you wish to apply SmartPost rate for packages that weight less than one pound.
• SmartPost Ship > $100 (Fedex will only insure up to $100 with SmartPost) (Checkbox field)
• SmartPost Minimum Weight ____LB (Allows you to specify the minimum weight that SmartPost Rate will be used for estimates.)

General Settings

There are 5 general settings for the API:

...

Sender Label Type: Choose "4x6" or "Half Sheet" and also optional setting "( packing slip with 4x6 label)"

...

Completing the FEDEX Label Certification Step

Most likely you'll want to take advantage of FEDEX Label printing directly within the UltraCart Shipping department. To enable FEDEX Label printing, navigate to the FEDEX configuration tab:

...

...

FedEx

The FedEx integration is one of the most advanced integrations in UltraCart.  By configuring your FedEx API information, UltraCart will not only be able to estimate rates using the discounts that you have with FedEx, but also print domestic shipping labels directly to PDF. 

FEDEX Credentials

There are two sets of API credentials required for the FEDEX API integration:

1. "Sandbox " Test Credentials (Used to complete the Label Certification)
2. Production Credentials 

The 4 API credentials are:

1. Account Number (found on fedex.com in your account settings)
2. Meter Number (found on fedex.com in your account settings)
3. API Key (aka Client ID)
4. Secret Key (aka Client Secret)

Obtaining Your Sandbox Test Credentials

Your test credentials are required to complete the Label printing certification step. 

To obtain your FEDEX Test API credentials:

1. Register for a FedEx developer account if you do not already have one.
2. Click on the "My Projects" link in the left menu.
3. Click on the large orange "Create API Project" button.
4. When the "Tell us about your API needs" popup displays, choose the option "I work for a company that Ships with FedEx and needs to integrate FedEx APIs into their system".
5. On the Step 1 - Select API(s) for your project screen, select "Ship, Rate & Other APIs".
6. Scrolling down on that same screen is a list of all APIs.  Check the "Rates and Transit Times API" and optionally (Ship API) if you will be printing labels as well.
7. On the Step 2 - Configure project screen, give your project a name (does not matter to UltraCart) and select your country.  There are two options as well:
   1. Do you plan on shipping using FedEx SmartPost Returns - UltraCart does not support processing returns through the FedEx API.
   2. Do you plan on shipping using FedEx Freight LTL - select Yes or No depending on your need.
8. On the Step 3 - Confirm details screen, check both boxes.
9. When finished, you will be redirected to your Project screen where you will find your development API Key, Secret Key, and Account Number.   Record those values.

Obtaining Your Production API Credentials

1. Visit the FedEx Developer Portal, then navigate:
   Menu → My Projects → Click on your project (create one if you do not have one)  → Production Key tab ( this is at the top of the screen below "API Project overview")
2. On the Configure Project screen, provide a Key name (UltraCart does not care about this name) and choose your Account Number to associated with the project.
3. The next screen titled Production keys will display your API key and Secret key.   Record those safely, as you will not see the secret again.  You should also have your Shipping Account which is easily viewed from your project page at any time.

Now that we have our Test and Production API credentials, we can configure them within UltraCart.

Log into your UltraCart account, then navigate:

The FedEx configuration shown below. Fill in your Test and Production Credentials:

Image Added

Now that you have your Test and Production credentials saved, you'll need to complete the rest of the UltraCart FEDEX Configuration form.

• For Rating you'll choose between "List" (retail pricing) or "Discounted" (your negotiated rates)
• Enter your Sender Address details
• For Ground Economy (formerly SmartPost) Hub, enter your Hub ID.
• Ground Economy (SmartPost) Rate < 1 LB (Checkbox field) select if you wish to apply SmartPost rate for packages that weight less than one pound.
• Ground Economy (SmartPost) Ship > $100 (Fedex will only insure up to $100 with Ground Economy) (Checkbox field)
• Ground Economy (SmartPost) Minimum Weight ____LB (Allows you to specify the minimum weight that Ground Economy Rate will be used for estimates.)

General Settings

There are 5 general settings for the API:

1. Web Service Environment (Choose either: Test or Production)
   *Select test during the Label Certification then switch to Production after the Label Certification step is completed.

2. Sender Label Type: Choose "4x6" or "Half Sheet" and also optional setting "( packing slip with 4x6 label)"
   

   Tip
   There are two types of labels that FedEx can print (half sheet and 4x6).  Most merchants get a Zebra LP2844 label printer and print the 4x6 labels.  The signature type option allows you to control how the customer will be required to sign for the package.  The label reference allows you to print custom fields 1-5 on the label.

   
   

3. Signature Type: Choose "Indirect", "Direct", or "Adult"
4. Include Clearance Entry Fee (Checkbox field)

Customs

Completing the FedEx Label Certification Step

Most likely you'll want to take advantage of FedEx label printing directly within the UltraCart Shipping department.  This requires label certification from FedEx.

Direct your web browser to https://developer.fedex.com/api/en-us/certification.html

Work through the steps listed.  Step 1 and Step 2 will be completed during your rate estimation setup.

• Step 3: Fill out the Label Cover Sheet:  https://developer.fedex.com/api/content/dam/fedex-com/irc/common/Label-Cover-Sheet-form.pdf
  • Your Fedex Production Authentication Key is your production "REST API Key" in the UltraCart configuration.   It's also displayed on your FedEx developer project (https://developer.fedex.com/api/en-us/project.html#/myprojects) as the "API KEY".
  • Are you using Third Party Solution?  NO.  UltraCart is not a third party solution.
  • Third Party Solution Name: <leave this blank>
  • The remaining fields are your own company's fields.
• Step 4: Generate and submit test labels to the Label Analysis Group
  • Navigate to the FedEx configuration tab:  Main Menu → Configuration → (middle menu) Checkout → Shipping → (Middle Menu) Under "Carriers", click "FedEx"
  • Scroll down the Test credentials column, to the blue button titled "Generate certification labels in test environment", then click the button.
  • You'll be presented with a table of 10 label scenarios, click the button titled "stock test scenarios", then click the save button.
  • Next, click the "Generate labels".
  • Generate test labels within the FedEx test environment associated with the application and
    then submit the test labels to the FedEx label evaluation team(s) for approval.
    
    Note: The Bar Code Analysis group requires a three-business-day turnaround time

...

• • for label evaluation.
    
    To avoid processing delays, follow the below best practices:
    • Labels must be printed on the model printer that will be used in production. These labels
    must be scanned at a minimum resolution of 600 DPI to ensure clear

...

• • images are available
    for the certification process. DO NOT SEND WEB SERVICES GENERATED FILES.
    • For thermal printers, the label image type must be requested in accordance with the
    printer model. Example: ZPLII for Zebra printers
    • Use the sender shipper/recipient address information when creating sample labels for
    evaluation. Only create sample labels for the specific services that are being applied for.
    • FedEx®
    Collect on Delivery (C.O.D.) label must also include the corresponding C.O.D.
    Return label.
    • FedEx International Express®
    shipments must also include the auxiliary/secondary Air
    Waybill (AWB) label.
    • Multi-piece shipments (MPS) must include one label for each package in the shipment.
    • Certain customized FedEx Ground Economy (formerly SmartPost®) labels require up to 72 hours

...

• • for evaluation.
    • FedEx Freight® labels do not

...

• • require evaluation.
    • Email the PDF and Label Cover sheet to: label@fedex.com
    
    • Physical labels may be sent to:
    FedEx Services
    WTC – Business Solutions Testing
    10 FedEx Parkway
    2nd Floor Horizontal
    Collierville, TN 38017
    
    Note: If the scanned labels are without visible defects (such as lines going through the
    barcode, spots in the ink, or physical damage), then they may pass inspection and approval will
    be granted. However, if there are defects, physical copies will be requested.
    If sending physical labels, pay attention to print quality and accidental enlargement/shrinkage
    of labels (i.e. scaling). These are the top two reasons why labels do not pass the label evaluation
    process.
    Step

...

• • 5. Label Evaluation
    The Bar Code Analysis group will evaluate the submitted test labels and approve or reject the
    labels. The Bar Code Analysis group will contact you regarding the approval or rejection of the
    submitted labels. If the labels are approved, continue to the next step. If the labels are rejected,
    correct the labels as instructed and resubmit them for approval.

FedEx Freight

...

Configure FedEx One Rate

To configure FedEx One Rate you need to take the following steps:

...

FedEx One Rate you need to take the following steps:

1. Navigate to Main Menu > Configuration > Checkout > Shipping > Packages. From you you need to add in the FedEx One Rate Packages. You can do this one at a time or by clicking on the "Add FedEx One Rate Packages". This will add all the packages at once.

...

A: The Fedex API integration Web Service Version 10 will only print orders shipping within the United States. For international delivery labels, change the Web Service Version to "26".   Note: As of June 1st, all web services will be retired.  So if you receive this error after that time and are using the latest FedEx REST API, please contact UltraCart Support.

Q: I have had my FEDEX credentials configured for a long time, but I am now getting an error when attempting to print a FEDEX label that I need to configure the FEDEX credentials, why am I suddenly encountering this error?
    

...