Background

Selling items that ship via freight online can be a complicated configuration.  Fortunately UltraCart integrates with Freightquote.com to provide the lowest cost rate calculation across a wide range of customers.  This tutorial will walk you through the process of setting up Freightquote.com for a complex environment such as selling ladders online.

Configuring Your Freightquote.com Account in UltraCart

First you'll need to visit http://www.freightquote.com and apply for an account.  Visit their website and click the "Signup and Start Shipping" link shown in the picture below.

After you have completed the signup and are logged into the Freightquote.com website you will see a section on their dashboard named "My API services".  Go ahead and click on the "I would like to signup button" as shown below.

This will send an email to the proper personnel at Freightquote.com to issue your API credentials.  Once you receive your API credentials you will need to configure them within UltraCart under:

On the Shipper Specific Options page there is a section for Freightquote.com as shown below.

In this screen there are three fields to configure:

Setting up Shipping Methods

The next step in the configuration process is to setup the LTL shipping method associated with Freightquote.com.  First navigate to the shipping methods section:

Click on the new method button as shown below.

From the list of methods select "Freightquote.com: LTL" and click Continue as shown below.

At this point UltraCart has added the method to your account.  If you want to insure your shipments then continue following the instructions.  If you don't insure your shipments skip to the next section of this article.

Click on the Insurance tab as shown below.

Select real-time calculation by Freightquote.com and click Save as shown below.

Setup of Packages

Packages are the containers that UltraCart's shipping system fits into for shipping calculations.  For our example we need to setup a number of different packages to represent pallets holding different length ladders.  Each pallet within our example is a 36" x 36" pallet.  Each different package will be configured to hold a different length from 36" to 300" (That is one tall ladder!).

First navigate to the packages section:

Click on the New Package button as shown below.

This will bring up the package editor.  Below is an example of the configuration for the pallet holding up to 108" ladders.

An explanation of each of the configuration fields is provided in the table below.

Click Save.  You will want to repeat this process for as many different packages as you need.  In this example we have configured packages ranging from 36" to 300".  Notice that there is a "Copy" button beside each package.  This makes it incredibly fast to replicate the configuration of one pallet and adjust only the one dimension and description.

Basic Item Setup

When you are shipping freight it is CRITICAL to specify the:

• Dimensions (Length x Width x Height)
• Weight
• Freight Class
• Restricted Shipping Method Usage

This tutorial assumes you are familiar with the basics of item configuration.  We'll cover how to configure the four options listed above.  On the Item tab of the Item Editor make sure to configure the dimensions and weight as shown below and then click the Shipping tab.

On the Shipping tab set the freight class inside of the Shipping Options section as shown below.

Next select "Freightquote.com: LTL" as the only valid shipping method for this item as shown below.

Now click the save button located at the bottom of the page.  This covers the basic additional requirements for a freight item.

Crates that Ship Separately

Some freight items are large and ship in their own crate.  For items that fall into this category there are a few more configuration changes that need to be made in addition to the basic freight item explained above.  On the shipping tab of the item editor select the ship separately checkbox and then configure the additional options as shown below.  In this example we are going to ship a 10 foot ladder that is in a crate.

Notice that when the Ship Separately box is checked an additional options section appears.  Although the item itself is configured as 120" x 36" x 36" we are specifying that the box this ships in is 126" x 36" x 36".  The box dimensions are the figures that will be communicated to Freightquote.com.  The create itself also weighs an additional 50 lbs. Finally we select the Package Special Type.  In this case we are dealing with a Crate.  It is critical to select one of the pallets or create for the special type when dealing with Freightquote.com shipments.

Batch Item Import/Export

In this tutorial we have covered numerous Item Configuration settings.  We recommend using the Batch Item Import and Batch Item Export tools located under the Item Management menu to batch change these settings.

We recommend creating a spreadsheet with the following columns to update your freight settings:

• Item ID
• Length
• Width
• Height
• Weight
• Freight Class
• Ship Separately
• Ship Separately Box Length
• Ship Separately Box Width
• Ship Separately Box Height
• Ship Separately Additional Weight
• Ship Separately Package Special Type

Attached at the bottom of this tutorial is an Excel Template that you can download and use to update your settings.  The template shows how the two items from this tutorial can be configured with the batch item

freight-import-template.xls