Introduction
Rotating transaction gateways allow a merchant to spread credit card transactions across multiple gateways. While available to all UltraCart merchants, it is primarily intended for merchants with substantial transaction volume. Merchants should thoroughly test their configuration before going live with this feature.
Navigation
Configuration
Requires "Advanced View"
Advanced View is required to access the Rotating Gateway Configuration:
Home → Configuration (Checkout) → Payments (Toggle to "Advanced" View) → Rotating Transaction Gateways
To begin, navigate to the Rotating Transaction Gateway tab.
Warning Message
When you navigate to the to the rotating gateways tab you will see a a message at the top of the page alerting you to the fact that you must migrate
the existing gateway in order to properly configure rotating gateways:
If you see the above warning about existing configuration under the transaction gateways tab, use the migration wizard located at the bottom of the page (other wise navigate to the transaction gateways configuration page and carefully copy and paste the credentials into notepad or text editor then manually un-configure the gateway there (unselect its checkbox then scroll down and click the save button.) Then navigate back to rotating gateways and click new then configured the gateway with the credentials you previously saved in the notepad/text editor.
Configuring a New Rotating Gateway
Rotating Gateway Editor
In this section, you will enter some basic information about this transaction gateway.
Code | Each rotating transaction gateway requires a unique code. It is recommended that you use a code that will allow you to quickly identify either the gateway or merchant account |
---|---|
Traffic % | Enter the desired traffic percentage you want this gateway to receive. If there are other restrictions (as discussed below) on this gateway, then UltraCart will resolve those restrictions, then compare the relative percentages across all gateways that qualify to handle the transaction 100% MAX The total traffic percentage among all configured gateways should not exceed 100%. |
Status | Each rotating transaction gateway can be placed in one of three states:
|
Deactivate after X consecutive failures | (Optional) If specified, UltraCart will automatically place this gateway into inactive status if the specified number of consecutive failures are encountered. |
Charges Appears On Statement As | (Optional) If this gateway has a different Charges Appear On Statement message than your store's default, then this value will be used for transactions conducted through this rotating transaction gateway |
Customer Service Email | (Optional) If this gateway has a different Customer Service email address than your store's default, then this value will be used for transactions conducted through this rotating transaction gateway |
Customer Service Phone | (Optional) If this gateway has a different Customer Service phone number than your store's default, then this value will be used for transactions conducted through this rotating transaction gateway |
If Charge Declines Try Other RTG | (Optional) If selected, then during a checkout, if the initial transaction is declined, attempt the next credit card authorization against the configured rotating gateway. |
Gateway
Select the gateway vendor from the list provided. Each gateway has different required information about your account. When you select a vendor, the vendor-specific fields will appear. This section behaves in an identical fashion as the Transaction Gateways tab, which is documented on this wiki in further detail.
Monthly Restrictions
Some merchant accounts have strict limits regarding the maximum monetary volume permitted each month. If the merchant account associated with this transaction gateway has such restrictions, this section will allow you to specify them to UltraCart.
Maximum Monthly | The maximum monetary volume that is permitted by this merchant account |
---|---|
Current Monthly | The current monetary volume processed through this merchant account. UltraCart will automatically keep this field up to date |
Reset Monthly at X EST | Enter the date and time the next reset will occur for this merchant account. UltraCart will automatically update this field each month to the correct date |
Date Restrictions
You can restrict each transaction gateway to only be allowed on specific dates, or specific days of the week, or days of the month. One common use of this feature is to alternate traffic between multiple gateways throughout the week. You can specify any of the options in this section, but the transaction date must match all of the selected rules in order to be deemed valid for use.
Date Between X and Y | Only allow transactions to be processed by this gateway if the transaction occurs within the specified date range. This is frequently used if a merchant is testing a new gateway provider or merchant account |
---|---|
Only on Day of Week | Only allow transactions to be processed by this gateway if the transaction occurs on one of the specified days of the week. |
Only on Day of Month | Only allow transactions to be processed by this gateway if the transaction occurs on the specified day of the month We have no idea of a practical use for this restriction. If you have any suggestions, please post them on our forums! |
Total Restrictions
The total restriction allows you to limit this rotating gateway from processing transactions where the total matches a certain criteria. For instance if your merchant account provider has approved transaction up to $100 then you could set the total restriction to <= $100 so only those transactions would be processed on this gateway.
Per-Transaction Restrictions
UltraCart can restrict a gateway to transactions whose total matches a certain criteria. For example, if the merchant account provider associated has only approved transactions up to $100, you could set this restriction to be "≤ $100"
To use this feature, first you need to select the comparison type to use.
< | Total must be below the specified value |
---|---|
≤ | Total must be below or exactly equal to the specified value |
= | Total must exactly equal the specified value |
≥ | Total must be exactly equal to or higher than the specified value |
> | Total must be higher than the specified value |
Next, simply enter the desired transaction total amount.
Trial Restrictions
UltraCart considers a trial to be "the first item that is purchased in an auto order sequence". Some merchants need to limit the number of transactions sent to a particular gateway in a given day or month to ensure that number of received chargebacks don't cross Visa / MasterCard thresholds. You can set a daily, monthly or both limits if you would like. Once configured, you can activate the "Rotating Transaction Gateway" notification on one of more of the users on your account from the Email Notifications section of the User configuration screen. When the gateway reaches this limit, UltraCart will send a notification email to those users.
Daily Trial Limit | The maximum number of transactions permitted through this gateway per day |
---|---|
Daily Trial Current Count | The number of transactions processed through this gateway on the current day |
Monthly Trial Limit | The maximum number of transactions permitted through this gateway per month |
Monthly Trial Current Count | The number of transactions processed through this gateway during the current month |
Payment Process Reserve tracking
UltraCart can help you judge the profitability of ongoing free trial campaigns by keeping track of whether the reserves associated with an order have been released or not. If you payment processor withholds a percentage of your transactions for a certain time period you can configure that information here. On the auto order profit report UltraCart will automatically determine your profitability based upon whether the reserves have been released or not. This will help you to maintain campaigns that are always cash flow positive.
Field | Description |
---|---|
Reserve Percentage | Set your reserve percentages as established with your merchant account/ gateway provider. |
Reserves Released Through | Set date in following format: MM/DD/YYYY |
Reserve Days | Configure the number of days reserves are held. |
Reserves Returned on Refund | Tracking reserves related to refunded orders. |
Applying specific rotating gateway to specific items
There are two option for overriding the default rotating gateway behavior and assigning a specific rotating gateway to be used with a specific item:
- Using buy link parameter RtgCode which sets the specific rotating transaction gateway that should be used to process this order.
Example assigned Rotating Gateway Code of "Auth3.1"
On the "Buy Link" URL: http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=DEMO&ADD=BONE&rtgCode=Auth3.1
In "Buy Form" code: <input type="hidden" name="rtgCode" value="Auth3.1" />
Configuring the rotating gateway via the "Payment Settings" section of the "Other" tab of the item editor:
Home → Store (Items) → Edit Item → Other (Tab) → Payment Settings
Applying RTG to a buy link
You can append the following to the buy link to specify a specific rotating gateway:
&RtgCode=DFLT (replace DFLT with the actual code you gave your rotating gateway.)
NOTE: IF you use this approach you'll need to make sure that all the items that the customer is placing into their cart ar assigned the same rotating gateway code. If the customer adds items to their cart that are assigned different RTG's the cart will randomly choose one of the RTG's to process the order.
Frequently Asked Questions
Q: One of our gateways charges less to process AMEX transactions than the other. If I turn off AMEX under the one that charges more, will UltraCart route the transactions to the one that charges less?
A: Yes, when UltraCart selects the gateway to use it considers which ones handle the specific method. You could conceivably have only one gateway that handles AMEX.
Q: What if I want to fill up one rotating gateways trial limit before using another one?
A: Typically you configure which product is using a particular rotating gateway on the "other" tab of the item editor. You can also configure the priority that the rotating transaction gateways are used in. So if you set priority of 1 and then 2 on two rotating transaction gateways with trial limits it will fill up the first one completely before rotating to the second gateway.
Q: We have multiple gateways and one gateway is never getting any transactions process through it. We do not have any gateways configured at the item level and we are only using a simple traffic percentage (along with cascade on decline). What would be the reason for the one gateway being skipped?
A: If a gateway fails the credential handshake, UltraCart will automatically choose one of the other configured gateways for subsequent transactions. So the first thing you will want to do is verify that the gateway credentials are accurate and active. Some gateways, like Authorize.net, will automatically expire the "Transaction Key" 24 hours after a new transaction key is generated. So, if in testing it appears not to be working , you may need to go back in there and review the active transaction key and potentially generate a new one.